Power Rangers Super Megaforce Deluxe Legendary Morpher - Sound Volume Modification

As mood is no good and sad, I decided to modified my Power Rangers Super Megaforce Deluxe Legendary Morpher to let the sound in phone mode (i.e. without a Ranger Key inserted in) to be the same loudness as when a Ranger Key inserted in... Also demonstrated some of my modified-restored Red Rangers Keys in the video...

Modify at your own risk!!!!!

After the covers are removed, you will see the pair of wires from the pirate head side going into the main body side, and this pair of wires has a white connector joint to the circuit. Pull out the connector to reveal the 2 pins, which are connected to the push switch to indicate when a key has been inserted. When key is inserted, the switch at the pirate head side is pressed and this is equivalent to the 2 pins shorting (touching) each other, and this will signal to the circuit to allow full sound volume for everything...


There are many ways to do the next step. I choose to just bend the 2 pins to touch each other securely, so that in case next time I want to revert back it is still possible... ok, actually I am lazy.... Some people may use a joint connector to connect the 2 pins, and some may even try to solder them together... I also tucked in the connector of the pair of wires under the circuit board and used a ball of blu-tack to secure in place... yes, lazy, but also in case next time still wants to restore back the soft volume.. hahahha... sigh...